Skip to content
SHOPS IN PARIS, HONG KONG, SINGAPORE, BRUXELLES, MANILA
SPECIALIST IN WATCHES, straps AND ACCESSORIES
FREE SHIPPING WORLDWIDE ON ORDERS OVER €500
Cart 1
Coffret tournevis d'horloger à embouts interchangeables ouvert, manche et embouts 1,0 à 1,8 mm

Interchangeable-bit watchmaker screwdriver set: one handle, four blades

Adjusting a Rolex or Omega bracelet, tightening a bridge screw, removing a balance wheel: at the workbench, you are constantly switching from one screwdriver size to another. MisterChrono welcomes a watchmaker screwdriver set with interchangeable tips: one handle, four flat blades from 1.0 to 1.8 mm, offered at €59.

Open watchmaker screwdriver set with interchangeable tips, handle and tips from 1.0 to 1.8 mm

One handle, four blades

The principle is simple: the handle accepts quick-change tips, each equipped with a flat blade held by a small locking screw. Remove the tip, snap the next one in, and switch from 1.0 to 1.8 mm without changing tools or searching for the right screwdriver in the base. The knurled body ensures a good grip for fine movements, and the whole thing fits in a box the size of a glasses case.

What the set contains

  • 1 quick-change handle, knurled body
  • 4 flat blade tips: 1.0 – 1.2 – 1.4 – 1.8 mm
  • 4 replacement blades of the same dimensions, lined up in their tube
  • 1 1.6 mm screwdriver for tightening the locking screws that hold the blades in the tips
  • 1 transparent storage box with padding foam

Set contents: knurled handle, 1.2 1.4 1.8 mm tips, replacement blades and 1.6 mm screwdriver

Ideal for Rolex and Omega bracelets

The set is particularly suited for Rolex and Omega bracelet screws: to remove or add a link, simply choose the tip whose blade fills the slot of the screw, without changing the handle. Convenient for adjusting a bracelet to your wrist yourself, or for adjusting the size when the wrist swells with the summer heat.

MisterChrono is independent of Rolex and Omega: this tool is neither manufactured nor approved by these brands.

Choosing the right blade

The watchmaker's rule: the blade must fill the entire width of the slot, without exceeding it. Too narrow, it rests on a small surface, slips and marks the screw head; too wide, it will scratch the plate or the bridge around. The fine sizes are for the small movement screws, the wider ones for the bridge and balance wheel screws. The ground blades of the set engage in the slot without play, which limits slipping.

Maintenance

A dull or chipped blade damages the screw slots. The set provides a replacement blade for each size: simply replace it as soon as the tip rounds off, by loosening the locking screw of the tip with the small 1.6 mm screwdriver provided. Store the tips in their housing after use, away from shocks and moisture.

Features

  • Reference: GY0384
  • Quick-change handle, knurled body
  • Flat blades: 1.0 – 1.2 – 1.4 – 1.8 mm
  • 1.6 mm screwdriver for blade locking screws
  • 4 replacement blades included
  • Transparent box with padding foam

Frequently asked questions

Can it be used to shorten a metal bracelet?

Yes. It is particularly suited for Rolex and Omega bracelet screws, and is suitable for links fixed by single-slot screws, provided you choose the blade that matches the slot. For double-slot screws, use rather our double screw removal tool, and for specific Richard Mille screws, our set of 10 Richard Mille screwdrivers.

Are the blades replaceable?

Yes. Four replacement blades, one per size, are provided in the set.

Is it a tool for beginners or professionals?

Both. The compact format is suitable for the hobbyist who maintains their own watches as well as for the watchmaker who wants a set of flat blades always at hand.

Available at MisterChrono

The watchmaker screwdriver set with interchangeable tips is offered at €59. Find it online and in our shop at 23 rue Danielle Casanova, Paris 1er, a stone's throw from the Place Vendôme, with our entire selection of watchmaker screwdrivers.

Previous Post Next Post
}